Quick answer
To clean a blender collar without a gasket, hand-wash it with warm soapy water and a soft brush, then rinse and dry thoroughly before reassembling. Avoid harsh scrubbers and dishwasher cycles that can warp the plastic.
Why cleaning the collar matters
The collar seals the blender jar to the base, so food residue and stains can accumulate over time. If the gasket is not included (as with the genuine KitchenAid White Collar for model KSB565), you have direct access to the collar's interior threads and sealing surface, making cleaning easier but also more important to do carefully.
What to avoid
Never use abrasive sponges or steel wool on a plastic blender collar—they leave scratches that trap bacteria and cause cloudiness. Also avoid soaking the collar in bleach or harsh chemicals, as they can degrade the plastic and affect the fit with your blender pitcher.
Step-by-step cleaning process
- 1. Disassemble the blender jar: Remove the collar from the blender pitcher by twisting it counterclockwise. Take out the blade assembly and any remaining gasket if present. Rinse the collar under warm water to remove loose debris. Check that no food particles are stuck in the collar threads before washing.
- 2. Hand-wash with mild detergent: Fill a sink or bowl with warm water and a few drops of dish soap. Use a soft sponge or nylon brush to gently scrub the inside and outside of the collar, paying attention to the threads and the sealing rim. Do not use abrasive pads or brushes. A soft toothbrush works well for reaching the thread grooves without scratching.
- 3. Rinse and inspect thoroughly: Rinse the collar under running warm water until all soap residue is gone. Hold it up to the light to check for any remaining stains or stuck-on food. For stubborn stains, make a paste of baking soda and water, apply it with a soft cloth, and rinse again. Residual soap can cause foaming during the next blend, so rinse until the water runs clear.
- 4. Dry completely before reassembly: Pat the collar dry with a clean lint-free towel, then let it air-dry for at least 30 minutes. Do not reassemble the blender jar while the collar is still damp, as trapped moisture can lead to mold or a loose seal. Store the collar separately if you won't reassemble immediately, to keep it dry and dust-free.
Product note
- White Collar for Blender Pitcher (Fits model KSB565) gasket not included: This genuine KitchenAid White Collar is designed to fit the blender pitcher for model KSB565 and does not include a gasket. Because there is no gasket to remove, you can clean the entire collar surface directly, but you must be gentle to avoid damaging the plastic sealing area.

White Collar for Blender Pitcher (Fits model KSB565) gasket not included

